Cold Plate Fittings

Below are drawings of the available fitting options for Lytron cold plates.

BD

For a leak-free joint, Lytron’s beaded tube fitting mates with a hose that is secured with a clamp.

SB

A unit with a straight tube fitting can be welded into your system or used with a self-locking, torque-free fitting such as Swagelok® or Cajon™.

9⁄16-18 UNF-3B

The CP30G01 fittings are SAE J1926/1-06 ports (9/16-18 UNF-3B). The female Oring port mates with a male fitting using straight threads. This holds the O-ring in compression, creating a leak-free seal.